1pc Mechanical Thermostat KTO 011 Mechanical Thermostat Adjustable Temperature Controller for Communications Wind Power Generation

Temperature ControllersKTO 011 Mechanical Thermostat Adjustable Temperature Controller Switch for Communications Wind Power GenerationFeature:1. The mechanical thermostat can be fixed on DIN standard rails (DIN15, DIN32, DIN35).2. The control range is 0 to 60, this product has the characteristics of easy installation, small size, and long service life.3. It can automatically start electric heaters and fans, produce condensed water drops, maintain a good working environment, and protect components.4. Small mechanical temperature regulators are designed to control electric heaters or cooling fans in electric cabinets, which are accidents caused by temperature factors.5. It is widely used in communications, wind power generation, firefighting equipment, ships, petrochemicals, large factories, coastal factories, docks, water treatment facilities, equipment, etc.Specification:Item Type: ThermostatMaterial: ABSModel: KTO 011Type: (Normally Closed), Used to Control the HeaterWorking Principle:Due to the Different Thermal Expansion Coefficients, When the Temperature of the Bimetallic Sheet Changes, the Thermal Expansion and Contraction Degrees of the Two Sides Are Different, So the Degree of Bending Changes at Different Temperatures.When the Temperature is Higher Than the Expansion Temperature of the Bimetal, the Contact Position of the Bimetal is Deformed and Disconnected, and the Circuit is Disconnected.When the Temperature is Lower Than the Expansion Temperature of the Bimetal, The Contact Position of the Bimetal is Restored to Its Shape and Closed, and the Circuit is Closed.The Thermostat is Divided into Two Types: Normally Open and Normally ClosedNormally Closed: When the Temperature is Set, the Thermostat is in the Normally Closed State. When the Actual Ambient Temperature Drops to or Close to the Set Temperature, the Load Heating Will Be Started. Usually the Thermostat is in the Normally Closed State. When the Temperature is Greater Than the Set Temperature, the Load is Always in a Stopped State.Normally Open: When the Temperature is Set, the Thermostat is in the Normally Open State. When the Actual Ambient Temperature is Greater Than or Close to the Set Temperature, the Load Will Be Started to Dissipate Heat. Usually the Thermostat is in the Normally Open State. When the Temperature is Lower Than the Set Temperature, the Load is Always in a Shutdown StateSwitch Temperature Control: ±7K (±4K Tolerance)Sensing : Temperature Sensing MaterialContact Type: Fast Action ContactContact Resistance: Service Life: 100,000 CyclesSwitch Large Capacity: 250VAC, 10(2)A; 120VAC, 15(2)A, 30WEMC: Acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-,3Connection Method: 2.5mm² WireInstallation Method: 35mm Din RailShell Material: Plastic Ul94 Standard V-0 Fire Rating, Light GreyAdjustment Range: 0 to 60Installation Method: AnyOperating/storage Temperature: -20 to +80 (-49 to +176)Protection Level: IP20Package List:1 x Thermostat==========Battery Included : No

• Temperature Controllers
• 1pc Mechanical Thermostat KTO 011 Mechanical Thermostat Adjustable Temperature Controller for Communications Wind Power Generation